Photocatalytic decomposition of methanol over La/TiO<Subscript>2</Subscript> materials

Lanthanum-modified TiO₂ photocatalysts (0.2–1.5 wt% La) were investigated in the methanol decomposition in an aqueous solution. The photocatalysts were prepared by the common sol-gel method followed by calcination. The structural (X-ray diffraction, Raman, X-ray photoelectron spectroscopy), textural (N₂ physisorption), and optical properties (diffuse reflectance spectroscopy, photoelectrochemical measurements) of all synthetized nanomaterials were correlated with photocatalytic activity. Both pure TiO₂ and La-doped TiO₂ photocatalysts proved higher yields of hydrogen in comparison to photolysis. The photocatalyst with optimal amount of lanthanum (0.2 wt% La) showed almost two times higher amount of hydrogen produced at the same time as in the presence of pure TiO₂. The photocatalytic activity increased with both increasing photocurrent response and decreasing amount of lattice and surface O species. It has been shown that both direct and indirect mechanisms of methanol photocatalytic oxidation participate in the production of hydrogen. Both direct and indirect mechanisms take part in the formation of hydrogen.     

In vitro gossypol induced spermatozoa motility alterations in rabbits

The objectives of the present study were to: (i) examine the in vitro dose response of rabbit spermatozoa motility to the antifertility agent gossypol (GOS) and (ii) determine whether filtered (FIL) and unfiltered (UNFIL) GOS differ in their magnitude of effect. Rabbit semen belonging to adult males (n = 5; 12–14 months) were cultured with UNFIL GOS and FIL GOS (5% solution) and subsequently diluted (1:1–7) for analysis using a Computer Assisted Semen Analyzer (CASA) system in 5 time periods (0, 60, 120, 180 and 360 minutes). At Time 0, no significant change in rabbit spermatozoa motility (MOT) and progressive motility (PROG) with GOS FIL was noted, while increases were observed with GOS UNFIL. At Time 60, weak changes were noted for MOT and PROG. After 120 minutes of culture with both GOS FIL and GOS UNFIL, MOT and PROG decreased significantly in some experimental groups. However, no differences were recorded for both the parameters at Times 180 and 360, with the exception of PROG in the GOS UNFIL category (groups A, B, E, F and G), where a significant decrease was noticed. Detailed evaluation of the distance and velocity parameters revealed reduction in all these studied markers after 60 and 120 minutes of in vitro culture with both GOS FIL and GOS UNFIL, indirectly confirming the PROG decrease. Straightness (STR), linearity (LIN), wobble (WOB), amplitude of lateral head displacement (ALH) and beat cross frequency (BCF) mostly remained unaltered at all time periods for GOS FIL, where as some minor alterations were noticed in GOS UNFIL category for STR, LIN, WOB, ALH and BCF parameters at Time 0, 60 and 120. The present study confirms the dose and time dependent alterations of rabbit spermatozoa motility parameters by GOS. The GOS dynamics in our experiment shows that rabbit spermatozoa as a biological material can indicate a GOS inhibition of motility. Obtained data for the first time indicates a higher immobilizing potential of unfiltered GOS in comparison to filtered GOS in its inhibitory action of spermatozoa motility parameters in rabbits.     

A long-term survey of heavy metals and specific organic compounds in biofilms, sediments, and surface water in a heavily affected river in the Czech Republic

To assess the long-term anthropogenic load of the Bílina River (Czech Republic), the concentrations of heavy metals and specific organic compounds in different river ecosystem matrices (water, biofilms, and sediments) were determined. Although the current concentrations of pollutants in surface water are low, frequently below the limits of the quantitative analytical methods used, the river ecosystem is still heavily loaded by anthropogenic pollution, mainly from the chemical and mining industries. This was demonstrated by analyzing biofilms and sediments. These matrices are more accurate representatives of the actual situation in the river and do not depend on hydrological conditions or random variability in water quality. The results indicate that the middle and the lower parts of the river are heavily polluted by mercury, arsenic, vanadium, polychlorinated biphenyls, hexachlorobenzene, and dichloro-diphenyl-trichloroethane. As a tributary of the Elbe River, the Bílina River represents a significant risk for the development of quality in this major European river.     

Low NOx burners--prediction of emissions concentration based on design,measurements and modelling

This paper describes possible ways of prediction of nitrogen oxides formation during combustion of hydrocarbon fuels. Mathematical model based on experimental data acquired from the testing facility has been developed. The model enables to predict--at a high probability measure--the extent of nitrogen oxides emissions. The mathematical model of nitrogen oxide formation relies on the application of simplified kinetic equations describing the formation of nitrogen oxides at so-called equivalent temperature. It is a semi-empirical model that comes out of experimental knowledge. An important role played by the burner design itself has been emphasized and therefore an important supplementary parameter of the model is the characteristic of the burner design. It has been established that there was a good agreement between experimental data and those calculated by the application of the model to various conditions marked out by different combustion parameters in the combustion chamber. The results obtained by application of the model respect the influence of parameters validated by industrial practice that control the formation of nitrogen oxides in the course of fuel combustion. Such parameters-first of all-tare the temperature in the combustion chamber and the concentration of the substances taking part in the reaction. By application of the model, it is possible to assess the consequence of, for example the surplus of combustion air, the increase of temperature of combustion air, the supply of inert gas, etc. on the nitrogen oxides emissions of the operating burner under evaluation. Efficient combining of experience and sophisticated approach together with importance of thus access for an improved design are shown.     

The effect of deoxynivalenol on the secretion activity,proliferation and apoptosis of porcine ovarian granulosa cells in vitro

The aim of this in vitro study was to examine the secretion activity, markers of proliferation and apoptosis in porcine ovarian granulosa cells (GCs) after deoxynivalenol (DON) addition. Ovarian granulosa cells were incubated with DON for 24h: 10, 100 and 1000 ng/mL, while the control group received no DON. The secretion of insulin-like growth factor I (IGF–I) and progesterone was determined by radioimmunoassay (RIA) and expression of cyclin B1, PCNA and caspase-3 by immunocytochemistry. IGF–I release by GCs was inhibited by DON, while progesterone release and the expression of cyclin B1 was stimulated by DON (at 1000 ng/mL but not at 10 and 100 ng/mL). PCNA expression was stimulated by DON (at 100 and 1000 ng/mL but not at 10 ng/mL). Caspase-3 expression was not influenced by DON treatment (at all doses). In conclusion, our results indicate, (1) a direct effect of DON on secretion of growth factor IGF-I and steroid hormone progesterone, (2) expression of markers of proliferation (cyclin B1 and PCNA) but not on the (3) expression of marker of apoptosis (caspase-3) in porcine ovarian granulosa cells. This in vitro study suggests the dose-dependent association of DON on porcine ovarian functions.     

Biodegradability and Mechanical Properties of Poly(vinyl alcohol)-Based Blend Plastics Prepared Through Extrusion Method

Plastic blend materials consisting of poly(vinyl alcohol), glycerol and xanthan or gellan were prepared through laboratory extrusion. Their base mechanical properties were compared with the properties of poly(vinyl alcohol) foil and their biodegradability in soil, compost and both activated and anaerobic sludge were assessed. In samples with lower polysaccharide content (10–21 %w/w) the tensile strength of 15–20 MPa was found; the elongation at break of all blends was relatively close to the parameter of poly(vinyl alcohol) foil. The biodegradability levels of the blends tested corresponded to the content of natural components, and the mineralization of the samples with the highest carbohydrate proportion (42 %) reached 50–78 %, depending on the type of the environment. Complete biodegradation of all samples occurred in activated sludge.     

Laccase activity in soils: considerations for the measurement of enzyme activity

Laccases (benzenediol: oxygen oxidoreductases, EC 1.10.3.2) are copper-containing enzymes that catalyze the oxidative conversion of a variety of chemicals, such as mono-, oligo-, and polyphenols and aromatic amines. Laccases have been proposed to participate in the transformation of organic matter and xenobiotics as well as microbial interactions. Several laccase assays have been proposed and used in soils. Here, we show that the optimal pH conditions for the laccase substrates 2,2'-azinobis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS, pH 3-5), 2,6-dimethoxyphenol (4-5.5), L-3,4-dihydroxyphenylalanine (DOPA; 4-6), guaiacol (3.5-5), 4-methylcatechol (3.5-5), and syringaldazine (5.5-7.0) are similar between purified laccases from Trametes versicolor and Pyricularia sp. and soil extracts; the substrate affinities of purified enzymes (K(M)) and soil extracts were also similar. The laccase assays showed specificity overlap with tyrosinase and ligninolytic peroxidases when hydrogen peroxide is present. The ABTS oxidation assay is able to reliably detect the presence of 13.5 pg mL(-1) or 0.199×10(-12) mol mL(-1) of T. versicolor laccase, which is three times more sensitive than the 2,6-dimethoxyphenol-based assay and more than 40 times more sensitive than any of the other assays. The low molecular mass soil-derived compounds and the isolated fulvic and humic acids influence the laccase assays and should be removed from the soil extracts before measurements of the enzyme activity are performed.     

NORMAN—network of reference laboratories,research centres and related organisations for monitoring of emerging substances

Environmental Science and Pollution Research -     

Determination of wine microbiota using classical method, polymerase chain method and Step One Real-Time PCR during fermentation process

The aim of our study was the identification of grape, must and wine microbiota during the fermentation process using a classical microbiological method and Real-Time PCR. The changes in different groups of microorganisms were monitored in total counts of bacteria, lactobacilli and yeasts. Microbiological parameters were observed during the current collection and processing of grapes in 2009. Samples were taken during the fermentation process in wine enterprises and a private vineyard. During this period 30 samples of wine among Müller Thurgau, Cabernet Sauvignon, Chardonnay, Tramin and Red Bio-wine were examined. Samples were collected from stages of grape-must unfiltered, grape-must filtered, the beginning of fermentation, fermentation, late fermentation and young wine. The highest total counts of bacteria ranged from 0.00 to 176 ± 15 CFU.mL(-1) in the wine of Müller Thurgau, the highest number of yeast ranged from 0.00 to 150 ± 9 CFU.mL(-1) in the wine of Müller Thurgau and the number of Lactobacillus spp. ranged from 0.00 to 92 ± 5 CFU.mL(-1) in the sample of Cabernet Sauvignon wine. The presence and sensitivity of Gram-positive and Gram-negative bacterial species Enterococcus faecium, Lactobacillus acidophilus, Lactobacillus crispatus and Lactobacillus salivarius were detected using Real-Time PCR (RTQ PCR). Susceptibility of Enterococcus faecium varied in different isolates from 1 to 10(6) CFU.mL(-1), the sensitivity of the species Lactobacillus acidophilus in different isolates of the wine samples ranged from 1 to 10(5) CFU.mL(-1). We also monitored representation of species Lactobacillus crispatus, which were captured by RTQ PCR sensitivity and ranged from 1 to 10(5) CFU.mL(-1). Identification of the species Lactobacillus salivarius in each of isolates by RTQ PCR method showed the presence of these bacteria in the range of 1 to 10(4) CFU.mL(-1).